FDX-64 Users Guide
45
7.6.6 Linear PCM Audio [EDID LINEAR PCM]
The maximum sampling frequency of PCM audio that is output from the source device
【
See: 7.6.1 EDID resolution [EDID DATA]
Using menu
EDID → EDID LINEAR PCM
For
Each input connector (IN1 to IN64)
Set value
32kHz: 32 kHz
44.1kHz: 44.1 kHz
48kHz: 48 kHz
[Default value]
88.2kHz: 88.2 kHz
96kHz: 96 kHz
192kHz: 192 kHz
Notes:
● If you do not press the “SET” key, the setting is not changed.
● For LCD monitors and the like, some audio formats are not supported. Select the audio format and
sampling frequency that are supported by the connected devices.
● If EDID resolution is set to “05” to “24”, this menu will be valid.
● Channels that do not have an input slot board cannot be selected in this menu.
7.6.7 AC-3 Dolby Digital Audio [EDID AC-3/Dolby D]
The maximum sampling frequency of AC-3 Dolby Digital Audio that is output from the source device
【
See: 7.6.1 EDID resolution [EDID DATA]
Using menu
EDID → EDID AC-3/Dolby D
For
Each input connector (IN1 to IN64)
Set value
OFF [Default]
32kHz
44.1kHz
48kHz
Notes:
● If you do not press the “SET” key, the setting is not changed.
● For LCD monitors and the like, some audio formats are not supported. Select the audio format and
sampling frequency that are supported by the connected devices.
● If EDID resolution is set to “05” to “24”, this menu will be valid.
● Channels that do not have an input slot board cannot be selected in this menu.
