FDX-32 Command Guide
47
@GOC / @SOC
Output contrast
Function
Getting
Setting
Format
@GOC,out_ch
@SOC,out_ch,contrast
Return value
@GOC,out_ch,contrast
@SOC,out_ch,contrast
Parameter
out_ch: Output channel
0 = All inputs
1 to 32 = OUTPUT1 to OUTPUT32
- 2 = Scan converter output slot board is not installed..
contrast : Contrast value of output video
100 = 100% [Default]
0 to 100 = 0% to 100%
Example
@GOC,1
@GOC,1,100
Getting the current output contrast of
output channel1.
Set to “100” (100%).
@SOC,1,100
@SOC,1,100
Setting output contrast of output channel1
to “100” (100%).
Completed normally.
Remarks
Supported since firmware ver.2.xx.
@GOB / @SOB
Output brightness
Function
Getting
Setting
Format
@GOB,out _ch
@SOB,out _ch,brightness
Return value
@GOB,out _ch,brightness
@SOB,out _ch,brightness
Parameter
out_ch: Output channel
0 = All inputs
1 to 32 = OUTPUT1 to OUTPUT32
- 2 = Scan converter output slot board is not installed..
brightness : Brightness value of output video
100 = 100% [Default]
0 to 200 = 0% to 200%
Example
@GOB,1
@GOB,1,100
Getting the current output brightness of
output channel1.
Set to “100” (100%).
@SOB,1,100
@SOB,1,100
Setting output brightness of output
channel1 to “100” (100%).
Completed normally..
Remarks
Supported since firmware ver.2.xx.
