FDX-32 Command Guide
36
@GEF / @SEF
Input corrections
Function
Getting
Setting
Format
@GEF,in_ch
@SEF,in_ch,h_size,v_size,h_posi,v_posi,
aspect,red,green,blue,brightness,gamma,
sharpness,hue,saturation
Return value
@GEF,in_ch,h_size,v_size,h_posi,v_posi,
aspect,red,green,blue,brightness,gamma,
sharpness,hue,saturation
@SEF,in_ch,h_size,v_size,h_posi,v_posi,
aspect,red,green,blue,brightness,gamma,
sharpness,hue,saturation
Parameter
in_ch : Input channel
1 to 32 = INPUT1 to INPUT32
- 1 = Input slot board is not installed..
- 2 = Scan converter output slot board is not installed..
- 3 = Video is not input.
h_size : Horizontal reading size
0 = [Default],
-100 to +100 = -100 dots to +100 dots
v_size : Vertical reading size
0 = [Default],
-30 to +30 = -30 line to +30 lines
h_posi : Horizontal start position
0 = [Default],
-100 to +100 = -100 dots to +100 dots
v_posi : Vertical start position
0 = [Default],
-30 to +30 = -30 lines to + 30 lines
aspect : Input video aspect ratio
0 = Automatic correction [Default]
1 = Full display
2 = Aspect ratio 4:3
3 = Aspect ratio 5:3
4 = Aspect ratio 5:4
5 = Aspect ratio 16:9
6 = Aspect ratio 16:10
7 = Aspect ratio 16:9 Letter box
