FDX-32 Command Guide
34
@GGM / @SGM Input gamma
Function
Getting
Setting
Format
@GGM,in_ch
@SGM,in_ch, gamma
Return value
@GGM,in_ch,gamma
@SGM,in_ch, gamma
Parameter
in_ch : Input channel
1 to 32 = INPUT1 to INPUT32
- 1 = Input slot board is not installed.
- 2 = Scan converter output slot board is not installed.
- 3 = Video is not input.
gamma :Gamma correction value of input video
10 = 1.0 [Default]
1 to 30 = 0.1 to 3.0
Example
@GGM,1
@GGM,1,10
Getting the current gamma correction
value of input channel1.
It is set to “1.0”.
@SGM,1,10
@SGM,1,10
Setting gamma correction value of input
channel1 to “1.0”.
Completed normally..
Remarks
Supported since firmware ver.2.xx.
@GFL / @SFL
Input sharpness
Function
Getting
Setting
Format
@GFL,in_ch
@SFL,in_ch,sharpness
Return value
@GFL,in_ch,sharpness
@SFL,in_ch,sharpness
Parameter
in_ch : Input channel
1 to 32 = INPUT1 to INPUT32
- 1 = Input slot board is not installed.
- 2 = Scan converter output slot board is not installed.
- 3 = Video is not input.
sharpness : Sharpness correction value of input video
0 = NORMAL [Default]
-5 to 15 = -5 to +15
Example
@GFL,1
@GFL,1,0
Getting the current input sharpness value
of input channel1.
It is setting to “NORMAL”.
@SFL,1,0
@SFL,1,0
Setting input sharpness value of input
channel1 to “NORMAL”.
Completed normally.
Remarks
Supported since firmware ver.2.xx.
