FDX-32 Command Guide
32
@GIC / @SIC
Input contrast
Function
Getting
Setting
Format
@GIC,in_ch
@SIC,in_ch,red,green,blue
Return value
@GIC,in_ch,red,green,blue
@SIC,in_ch,red,green,blue
Parameter
in_ch : Input channel
1 to 32 = INPUT1 to INPUT32
- 1 = Input slot board is not installed.
- 2 = Digital scaler output slot board is not installed.
- 3 = Video is not input.
red : Input video contrast is RED.
green : Input video contrast is GREEN.
blue : Input video contrast is BLUE.
100 = 100% [Default]
0 to 100 = 0% to 100%
Example
@GIC,1
@GIC,1,100,100,100
Getting the current input video contrast of
input channel1.
Red, green, and blue are set to “100%”.
@SIC,1,100,100,100
@SIC,1,100,100,100
Setting input contrast of input channel1 to
“100%” for red, green, and blue.
Completed normally.
Remarks
Supported since firmware ver.2.xx.
