FDX-16 User
’s Guide
41
7.5.4 Deep Color [EDID DEEP COLOR]
Deep Color (color depth) output from the source device
【
Reference:7.5.1 EDID resolution [EDID DATA]
】
Using menu
EDID → EDID DEEP COLOR
For
Each input connector (IN1 to IN16)
Set value
24Bit: 24 bit/pixel (8 bit/component) [Default]
30Bit: 30 bit/pixel (10 bit/component)
36Bit: 36 bit/pixel (12 bit/component)
Notes:
● If you do not press the “SET” key, the setting is not changed.
● If you set “30 bit / pixel (10 bit / component)” or “36 bit/pixel (12 bit / component)”, the transmission clock
frequency is increased. As a result, noise appears on image when a bad-condition cable or long cable is
connected. In such a case, set this menu to
“24 bit / pixel (8 bit/component)”. If EDID resolution is set to
“05” to “24”, this menu will be valid.
● Since optical I/O slot boards do not support Deep Color, 24 bit/pixel (8 bit/component) is used.
● Channels that do not have an output slot board cannot be selected in this menu.
