IDK FDX-12UHD User Manual Download

Page: 54 / 80

FDX-12UHD User’s Guide

8.5.12 Dolby TrueHD Audio

Menu Top

→

EDID

→

EDID Dolby TrueHD

Setting for

Each input connector (IN1 to IN12)

Setting value

OFF : OFF [Default]

44.1kHz : 44.1 kHz

48kHz : 48 kHz

88.2kHz : 88.2 kHz

96kHz : 96 kHz

176.4kHz : 176.4 kHz

192kHz : 192 kHz

You can set the maximum sampling frequency of Dolby TrueHD Audio that is output from the source device.

The setting will be applied only if the EDID resolution is set to one of “05” to “46”.

【

See: 8.5.1 EDID resolution

】

Notes:

・

Some LC monitors do not support some audio formats. Select the audio format and sampling frequency that

are supported by the device.

・

Ensure to press the “MENU/SET” key to apply the setting.

・

Channels that do not have an input slot board cannot be selected in this menu.

8.5.13 WXGA

Menu Top

→

EDID

→

EDID WXGA SELECT

Setting for

Each input connector (IN1 to IN12)

Setting value

1360x 768: 1360x768 [Default]

1366x 768: 1366x768

You can set the number of WXGA pixels based on the resolution setting of EDID.

The setting will be applied only if the EDID resolution is set to one of “05”, “08”, and “16” to “22”.

【

See: 8.5.1 EDID resolution

】

Notes:

・

Ensure to press the “MENU/SET” key to apply the setting.

・

Channels that do not have an input slot board cannot be selected in this menu.

Summary of Contents for FDX-12UHD

















































































Search results

Summary of Contents for FDX-12UHD

Reviews:

Related manuals for FDX-12UHD

Brands by name

Popular brands

IDK FDX-12UHD, User Manual

Search results

Summary of Contents for FDX-12UHD

Reviews:

Related manuals for FDX-12UHD

Brands by name

Popular brands