FDX-12UHD User’s Guide
41
8.3 Output setting
8.3.1 Output mode
Menu Top
→
OUTPUT SETTING
→
OUTPUT MODE
Setting for
Each output connector (ALL, OUT1 to OUT12)
Setting value
AUTO : Automatic [Default]
HDMI RGB : RGB
HDMI 422 : YCbCr 4:2:2
HDMI 444 : YCbCr 4:4:4
DVI : DVI
HDMI 420 : YCbCr 4:2:0
(Available only with 4K@50 / 59.94 / 60. For others, it is set to “AUTO “automatically)
The sink device automatically selects the appropriate color space according to the color space of the input
video. If the sink device cannot select the color space for some reason, the color space can be manually
selected using this menu.
Notes:
・
This function is available only when HDMI signal is input.
・
When 4K YCbCr 4:4:4 signal is input, the FDX outputs the signal at YCbCr 4:2:0 to the sink device
supporting YCbCr 4:2:0 (not supporting YCbCr 4:4:4).
・
DVI output: 4K@30 or less
・
4K HDBaseT output slot board output 4K YCbCr 4:4:4 signal at YCbCr 4:2:0 automatically.
・
Channels that do not have an output slot board cannot be selected in this menu.
