FDX-08 User Guide
64
8.7.5 Audio channel [EDID SPEAKER CH]
You can set the number of multiple channels to be output from the source device.
【
See: 8.7.1 EDID resolution [EDID DATA]
Menu
EDID → EDID SPEAKER CH
Setting for
Each input connector (IN1 to IN8)
Setting value
2CH [Default]
2.1CH
5.1CH
7.1CH
■ The number of channels and speaker configuration
The number of
channels
FL/FR
LFE
FC
RL/RR
RLC/RRC
2 channels
ON
OFF
OFF
OFF
OFF
2.1 channels
ON
ON
OFF
OFF
OFF
5.1 channels
ON
ON
ON
ON
OFF
7.1 channels
ON
ON
ON
ON
ON
[Fig. 8.8] The number of channels and speaker configuration
Notes:
・
Press the SET key to apply the setting.
・
The setting will be applied only if the EDID resolution is set to one of “05” to “24”.
・
Only channels of input board can be selected in this menu.
Channels in which an SDI input board cannot be selected.
RL
RLC
RRC
RR
FR
ＦＣ
FL
LFE
FL
：
Front Left
FC
：
Front Center
FR
：
Front Right
RL
：
Rear Left
RR
：
Rear Right
RLC Rear Left Center
RRC Rear Right Center
Low Frequency Effect
LFE
:
:
:
