FDX-08 User Guide
50
8.4.5 Output Deep Color [OUTPUT DEEP COLOR]
Menu
OUTPUT SETTING → OUTPUT DEEP COLOR
Setting for
Each output connector (OUT1 to OUT8)
Setting value
24Bit: 24 bit/pixel ( 8 bit/component) [Default]
30Bit: 30 bit/pixel ( 10 bit/component)
36Bit: 36 bit/pixel (12 bit/component)
Notes:
・
If you set “30 bit/pixel (10 bit/component)” or “36 bit/pixel (12 bit/component)”, the transmission clock
frequency is increased. As a result, noise appears on image when a bad-condition cable or long cable is
connected. In such a case, set this menu to “24 bit/pixel (8 bit/component)”.
・
Digital scan converter output board and HDBaseT scan converter output board support Deep Color
up to “30 bit/pixel (10 bit/component)”.
・
Since an optic I/O board and optic scan converter output board do not support Deep Color, 24 bit/pixel
(8 bit/component) is used.
・
Only channels of output board can be selected in this menu.
