DFS-01UHD / DFS-01HD User’s Guide
48
8.9.12 WXGA
Menu Top
→
EDID
→
EDID WXGA SELECT
Setting value WXGA (1360x768) [Default]
WXGA (1366x768)
You can select the WXGA pixels based on the resolution setting of EDID.
The setting will be applied only if “
” is set to one of “02”, “05” and “13” to “19”.
Press the MENU/SET key to apply the setting.
8.9.13 CEC physical address
Menu Top
→
EDID
→
EDID CEC ADDRESS
Setting value
OFF : Sets the physical address to “0”. [Default]
ON : Copies the physical address of sink device.
You can copy the CEC physical address of the connected sink device to DFS’s EDID.
If the CEC physical address of the connected sink device and DFS’s address are not the same, the CEC
functions, such as input switching in the sink device at start-up, may not work correctly. The problem can be
solved by using the CEC physical address that is copied into the DFS.
The setting will be applied only if “
” is set to one of “02” to “23”, “40” to “45”.
Press the MENU/SET key to apply the setting.
Note:
CEC system link functions supported by other companies are not guaranteed to work correctly by this setting.
Check the actual configuration.
