IDK DFS-01UHD Page 47 User Manual Download

Page: 47 / 65

DFS-01UHD / DFS-01HD User’s Guide

8.9.8 Dolby Digital Plus Audio

Menu Top

→

EDID

→

EDID Dolby

Setting value

OFF : OFF [Default]

ON : 48 kHz

You can set the maximum sampling frequency of Dolby Digital Plus Audio that is output from the source

device.

The setting will be applied only if “

8.9.1 Resolution

” is set to one of “02” to “23”, “40” to “45”.

Press the MENU/SET key to apply the setting.

8.9.9 DTS Audio

Menu Top

→

EDID

→

EDID DTS

Setting value

OFF : OFF [Default]

ON : 96 kHz

You can set the maximum sampling frequency of DTS Audio that is output from the source device.

The setting will be applied only if “

8.9.1 Resolution

” is set to one of “02” to “23”, “40” to “45”.

Press the MENU/SET key to apply the setting.

8.9.10 DTS-HD Audio

Menu Top

→

EDID

→

EDID DTS-HD

Setting value

OFF : OFF [Default]

ON : 192 kHz

You can set the maximum sampling frequency of DTS-HD Audio that is output from the source device.

The setting will be applied only if “

8.9.1 Resolution

” is set to one of “02” to “23”, “40” to “45”.

Press the MENU/SET key to apply the setting.

8.9.11 Dolby-TrueHD Audio

Menu Top

→

EDID

→

EDID Dolby TrueHD

Setting value

OFF : OFF [Default]

ON : 192 kHz

You can set the maximum sampling frequency of Dolby-TrueHD Audio that is output from the source device.

The setting will be applied only if “

8.9.1 Resolution

” is set to one of “02” to “23”, “40” to “45”.

Press the MENU/SET key to apply the setting.

Summary of Contents for DFS-01UHD


































































Search results

Summary of Contents for DFS-01UHD

Reviews:

Related manuals for DFS-01UHD

Brands by name

Popular brands

IDK DFS-01UHD, User Manual

Search results

Summary of Contents for DFS-01UHD

Reviews:

Related manuals for DFS-01UHD

Brands by name

Popular brands