DFS-01UHD / DFS-01HD User’s Guide
40
8.8.4 Lip sync
Menu Top
→
AUDIO
→
AUDIO LIP SYNC
Setting value 0 FRAME to 16 FRAME [Default] 0 FRAME
You can adjust the gap between video (motion) and audio (sound).
Up to 16 frames can be set.
If sampling frequency is 192 kHz and vertical synchronous frequency is 24 Hz or 29 Hz, the maximum lip sync
values are mentioned below:
[Table 8.5] Maximum lip synch
Sampling
frequency
Vertical synchronous
frequency
Maximum lip sync
192 kHz
23 Hz
Up to 8 frames
29 Hz
Up to 10 frames
For other conditions
Up to 16 frames
8.8.5 Test tone
Menu Top
→
AUDIO
→
AUDIO TEST TONE
Setting value
Test tone:
OFF [Default], 1000Hz, 400Hz
Speaker:
・
ALL [Default]
・
LFE
: LOW FREQUENCY EFFECT
・
FL/FR
: FRONT L/R
・
FC
: FRONT CENTER
・
RL/RR
: REAR L/R
・
RL
: REAR LEFT
・
RLC/RRC : REAR L/R CENTER
・
RR : REAR RIGHT
・
FL
: FRONT LEFT
・
RLC
: REAR LEFT CENTER
・
FR
: FRONT RIGHT
・
RRC : REAR RIGHT CENTER
Since test tone can be output only to specific speakers, you can check the position of the speakers.
For “LFE” (LOW FREQUENCY EFFECT), only test tone of 30 Hz is output.
【
See: 8.9.4 Speaker configuration
