IDK DFS-01UHD, Command Reference Manual

Page: 27 / 44

DFS-01UHD/DFS-01HD Command Guide
27
3.3.5 Setting input
@GDT / @SDT No-signal input monitoring
Getting Command
@GDT
Response @GDT, time
Setting Command @SDT, time
Response @SDT, time
Parameter time: No-signal input monitoring time
0 = OFF, 3 to 15 = 3 sec. to 15 sec. [Default] 10 = 10 sec.
Getting
example Command
Response
@GDT
@GDT,6
Description Getting the no-signal input monitoring time
6 sec.
Setting
example Command
Response @SDT,6
@SDT,6
Description Setting the monitoring time to 6 seconds
Remarks
－
@GHE / @SHE HDCP input enabled/disabled
Getting Command @GHE
Response
@GHE, hdcp
Setting Command @SHE, hdcp
Response @SHE, hdcp
Parameter hdcp: HDCP input enabled/disabled
0 = DISABLE,
1 = HDCP 1.4 (ENABLE) [Default] DFS-01HD,
2 = HDCP 2.2 (ENABLE)
**
[Default] DFS-01UHD
**
Only for DFS-01UHD
Getting
example Command
Response @GHE
@GHE,1
Description Getting the HDCP enabled/disabled
HDCP 1.4 input is enabled
Setting
example Command
Response @SHE,0
@SHE,0
Description Setting the HDCP input to be disabled
Remarks
－