COS-100HD-B User
’s Guide
51
01 : 1 [bit]
[Default]
02 : 2 [bit]
7.6.12 [ C18 ] RS-232C communication: Receiver ID
You can set the ID for serial transmission with a specified receiver in Daisy Chain connection.
Set the receiver ID to
“00” to transmit the data to a specified receiver.
This setting is valid only if [ C13 ] is set to
“00” (Transmission mode).
【
See:7.6.7 [ C13 ] RS-232C (P.50)
】
Setting values
00
: ID for unspecified receiver [Default]
01 to 15
: ID for specified receiver
