background image

Part 2 - Configuration

47

FEN

If using a dynamic IP address, FEN service makes it easy 
to connect to the DVR from a remote program without 
having to configure dynamic IP or router settings.

• 

Use FEN

: Check if you wish to use FEN service.

• 

FEN Server

: Enter the FEN server’s IP address or 

domain name.

If you have configured the DNS Server setting under

 

Network - IP Address

, you can enter the FEN server's 

domain name instead of its IP address in the 

FEN

 

Server

 field.

• 

Port

: Specify the FEN server’s port number.

If using an IP router (or NAT), port configuration and 
other network functions will depend on the usage 
method of the IP router (or NAT).

• 

FEN Name

: After entering the DVR name you wish 

to register on the FEN server, check and register the 
entered name. This is a unique DVR name that will be 
registered on the FEN server.

 

You will not be able to save FEN settings unless you 
click on the Check button next to the DVR Name 
field and check the entered name's availability.

 

You will be prompted with an error message if you 
do not enter DVR name or enter a name already 
registered to the FEN Server.

 

If the FEN name contains the #, \, and/or % symbol, 
it might not be able to connect to the DVR from the 
IDIS Web program.

• 

Status

: Used to check the status of the device being 

registered to the FEN server.

Select 

Save

 after making changes to register the DVR’s 

name to the FEN server.

If FEN has been configured correctly, the FEN server's 
help desk information will be displayed in the 

Help 

Desk

 field the next time you access the FEN Setup 

screen.

Summary of Contents for TR-2416











































































Reviews: