Part 2 - Configuration
31
Disk
Temperature
Specify the threshold
temperature. Once any disk
reaches this threshold, the
system will issue an alert.
Disk S.M.A.R.T.
Monitors disks that support
S.M.A.R.T. and notifies the user if
a disk error is detected.
Disk Config
Change
It will be highlighted when the
DVR reboots after the hard disk
drive has been replaced.
No Storage
Found
It will be highlighted when
no hard disk drive has been
connected.
•
For system events, only an e-mail notification of
actions can be selected.
•
In order to use the Notify(Callback) feature, the DVR
must be registered to the remote program on the
receiving PC's end.
About
Record Setup
Refer to the
for basic
information on using the Setup menus.
General
Configure general recording settings.
•
Recycle
: When the recording disks become full,
the system overwrites existing data with new data,
starting with the oldest first. If
Recycle
is disabled,
recording will simply stop when the recording disks
reach their maximum capacity.
•
Event Record Dwell
: If linked recording is designated
as an event-triggered action, recording takes place for
the duration specified under this setting.
•
Auto Deletion
: Configure this option to delete
recording data automatically after the specified
number of days has elapsed. Select between 1 day
and 999 days.
To disable Auto Deletion, select
Never
. If enabled,
recording data will be stored on the DVR for
the specified number of days and then deleted
automatically. Expired recording data are deleted
automatically at midnight and will be deleted even if
the system reboots or the
Auto Deletion
setting has
been changed.
