Idis ID391H, User Manual

Page: 53 / 98

Digital Video Recorder
45
Text In
You can set up text in event.

1:
Displays text-in device number. Clicking each button allows you to change text-in event settings for each
camera.

Enable:
Enables text-in event function. When the DVR detects text-in data from a text in device, it considers
it as an event.

For Each Text-in Controller:
Click the
Select Text-In System
button and select the text-in product from the list.

Syntax
– Case Sensitive:
Text strings are case sensitive. Refer to the text-in product manufacturer’s user manual to
determine if the text strings are case sensitive. If the text-in product distinguishes between upper and lower case
letters, make certain this is enabled.
– Transaction Start
: Enter the transaction start text string. The DVR considers that a transaction starts when the
start text string is entered. If Any character is enabled, you will not be able to enter a text string, and the DVR
considers that a transaction starts when any text string is entered.
– Transaction End : Enter the transaction end text string. The DVR considers that a transaction ends when the
end text string is entered. Enter the number of additional text lines to be displayed after the end of the transaction
in the
More Lines option.
– Line Delimiter : Enter the character(s) that the text-in product uses to indicate the end of a line. Special characters
can be created using ^ and a capital letter;e.g., ^J for NL (New Line), ^M for CR (Carriage Return). Refer to the
text-in product manufacturer’s user manual for Line Delimiter character(s).
– Ignore String
: Enter any text strings to be ignored. Refer to the text-in product manufacturer’s user manual for
text strings that the text-in product sends during normal transactions so that those text strings will not be considered
as text-in.

Dwell Time
– Display Dwell
: Set the dwell time to display the text-in information.
– Transaction Timeout
: Set the length of time to wait for a new text string. The DVR will consider a transaction
complete if no new text is entered during the time-out period after the last text input even though the transaction
end text string is not entered.