Digital Video Recorder
33
User Define Alarm Out
You can set up the DVR to activate user define alarm out when an event occurs.
1
to
32:
Displays alarm out number.
or
buttons are supported for 32-Channel model only.
Use Remote Port:
Set the user define alarm out via remote port.
IP address
,
Port:
Set the IP address and port number of the device connected to the DVR via TCP networking.
Click the
Test connections
button to test the connection to the device.
From
,
To:
Set user define alarm out activation period. Alarm out is activated during the period only. If the
From
time is later than the
To
time, the user define alarm out will be not activated From end time
(
to time) to start
time(to
)
.. If you set
To: 08:00
and
From: 18:00
,
this means the alarm will be not activated at the from 8 am to 6 pm
and be activated at all other times.
Dwell Time:
Set the user define alarm out activation duration.
Summary of Contents for ID391H
