Part 2 - Configuration
75
Display Setup
Refer to the
for basic
information on using the Setup menus.
OSD
Show OSD (On Screen Display) information on the
bottom of the screen.
Status
●
Date
and
Time
: Displays the date and time.
Camera
●
No.
: Displays the camera number on the upper left
corner of the camera screen.
●
Title
: Displays the camera name on the upper left
corner of the camera screen.
●
Record
: Displays recording and schedule icons.
●
Audio
: Displays the
icon on channels generating
audio.tkfkd60
●
tkfkd
●
PTZ
: Displays the
icon on PTZ cameras.
●
PTZ Zoom
: Displays the zoom magnification (e.g. x2,
x3, etc.)
●
Text-In
: Displays strings received from text-in devices.
Select
Display Dwell
and specify how long to display
the text-in string. Text-in strings are shown on the
single screen only.
●
Resolution (Search)
: Displays the recording
resolution in Placyback mode.
●
Codec (Search)
: Displays the codec information in
Placyback mode.
Main Monitor
Configure monitor-related settings.
●
Mode
: Select
Full Sequence
or
Cameo Sequence
.
●
Interval
: Select between 3 secs and 2 mins. For more
information on Sequence, refer to the
●
Manual Configuration
: Set the resolution manually
regardless of the resolution supported by the monitor.
●
Resolution
: Select from 3840 x 2160, 1920 x 1200,
1920 x 1080, 1680 x 1050 and 1600 x 1200.
●
Event Monitoring On
: With Event Monitoring
enabled, the camera screen linking event monitoring
is shown. For more information on Event Monitoring,
refer to the
●
Event Alert
: With Event Alert selected, the red line
appears on the top of the camera screen linking event
monitoring when an event occurs.
•
Supported resolutions may be restricted
depending on the monitor.
•
3840 x 2160 @ 50/60Hz resolution is supported
only in HDMI 2.0 monitor.
•
We recommend using 3840 x 2160 or 1920 x 1080
resolution.
•
If you use a VGA monitor as the main display, we
recommend that you use a resolution of 1920 x
1080 or below.
•
HDMI deep color feature is not supported.
•
If the HDMI resolution is 1920x1200 or below,
VGA resolution will be displayed.
•
If the HDMI resolution is 3840x2160, VGA
resolution of 1920x1080 will be displayed.
●
Use BRP(Boost Remote Performance) mode
: With
BRP mode on, the camera full screen does not display
in live mode and the network bandwidth can limit to
100Mbps.
