Part 2 - Configuration
78
Additional Event_Alarm Box Loss
This event occurs when alarm box device is
disconnected.
●
No.
: Select which cameras to apply Alarm Box Loss to.
●
Activation Time
: Specify how long Alarm Box Loss
has to last in order for it to be considered as an event.
When Alarm Box Loss is not detected for the specified
duration of time, it will not be considered as an event.
●
Actions
: Specify which actions to take when
Tampering is detected.
–
Record
: Specify which cameras to begin linked
recording on when an event occurs. If the schedule
is set to
Event
or
Time & Event
mode, the selected
cameras will begin linked recording when an event
occurs.
–
Alarm-Out
: Designate event-triggered alarm-out
channels (each for the NVR and camera) and beeps.
–
Notify
: Configure to be notified of events by Mail,
LAN1 through 5, Push, FTP, and/or Alert Window.
–
PTZ
: Moves the PTZ camera to a specific preset
position when an event occurs.
–
Event Monitoring:
Selects the cameras to monitor
when an event occurs.
In order to use the Callback feature, the NVR must
be registered on the remote program.
VA Box
A list of events that occur on VA Box.
VA Box_Exceed the People Limit
This event occurs when the number of people in the
defined area exceeds the set number
.
●
Setup
: Configure Exceed the People Limit event.
–
Exceed the People Limit
: When the number of
selected people in a defined area (zone) exceeds
the limit, an event occurs.
