Part 1 – Introduction
15
Factory Reset
Located next to the Audio Out port on the rear of the
NVR is a switch that, once activated, will reset the NVR to
all its initial factory settings.
A factory reset will clear all NVR settings configured by
the user.
You will need a straightened paper clip to access the
factory reset button.
1
Turn off the NVR.
2
Insert a straightened paper clip into the factory reset
switch hole and press the switch. Turn on the NVR
while holding the switch.
3
Press and hold until you hear 2 beeps from the NVR's
internal buzzer.
4
All NVR settings will be returned to their factory
values once you remove the paper clip.
Connections on the Rear Panel
Direc
tIP™ S
wit
ch
eSATA
Storage Device
Speaker
VGA Monitor
Camera
Camera
Network
IDIS Center
Remote
Monitoring
Keyboard
POS
Power (12V)
Power (48V)
DirectIP™ Gigabit
PoE Switch
Sensor
Alarm
HDMI Monitor
