Part 2 - Configuration
48
Stream
Configure the camera’s live and recording resolution,
encode, picture quality, transfer speed, and ips speed
settings.
●
Camera Channels
: It’s possible to configure a unique
video profile for each camera.
●
: Apply the video profile settings of the camera
selected under Camera Channel to a different camera.
●
Live/Remote Video Profile
: Check the current Live
video picture quality and edit remote video profile
settings.
–
Use Dynamic Remote Stream
: Automatically
transmits the
Live 1
(Single Screen),
Live 2
(2x2), or
Remote
(greater than 2x2) stream, depending on
the remote program’s live screen layout.
●
Record Video Profile
: Set up 4 recording quality
profiles.
●
Video Profile
: Select
Live 1
,
Live 2
,
Remote
, or
Custom
(available from Record Video Profile only).
Live 1
and
Live 2
allows the user to change
Bitrate
and
Quality
settings only and configures the
remaining settings automatically.
–
Encode
: Supports H.264.
–
Resolution
: Select a resolution supported by the
camera. Maximum available resolution is chosen
automatically based on the selected video profile.
–
Quality
: Select
Very High
,
High
,
Standard
,
Basic
,
or
Manual
. You can assign different Quality settings
to different cameras.
–
Bitrate
: Select
CBR
or
VBR
. Transmitted data size
is fixed with
CBR
but varies depending on the
amount of movements in the images with
VBR
.
–
ips
: Select a value between 1 and 30. Maximum
ips
is determined automatically based on the selected
video profile.
●
Intelligent Codec
: Lower bitrate by using the
intelligent codec.
•
Some camera models may not support the
Intelligent Codec function.
•
When using intelligent codec function, the
start of some functions, such as clip copy or clip
attachment can be changed to an earlier point
than the selected point.
●
MAT Setup
: Select the MAP Setup option to use the
MAT (Motion Adaptive Transmission) function during
video transmission and recording.
Some camera models may not support the MAT
function.
* MAT function(Motion Adaptive Transmission) reduces
bandwidth overload and saves storage capacity by
reducing the frame rate of the video during periods of
inactivity. The user can select the period of sustained
inactivity which triggers this function by adjusting
Inactivity Period.
●
Sensitivity
: Set the motion detection sensitivity.
Higher values will result in more sensitive motion
detection.
●
Inactivity Period
: Set the Inactivity Period. If motion
is not detected for the duration of time specified,
video is transmitted and recorded using the frame
rate designated below until movement is detected
again.