Part 2 - Configuration
69
Push
Configure Push settings.
Select
Push
to use Push feature.
The Push feature sends out event-related messages to
mobile phone.
Enable to receive the event occured in NVR on the
mobile phone(Android, iOS). The NVR must be
registered and set in mobile phone.
Display Setup
Refer to the
for basic
information on using the Setup menus.
OSD
Show OSD (On Screen Display) information on the
bottom of the screen.
Status
●
Date
and
Time
: Displays the date and time.
Camera
●
No.
: Displays the camera number on the upper left
corner of the camera screen.
●
Title
: Displays the camera name on the upper left
corner of the camera screen.
●
Record
: Displays recording and schedule icons.
●
PTZ
: Displays the
icon on PTZ cameras.
●
PTZ Zoom
: Displays the zoom magnification (e.g. x2,
x3, etc.)
●
Resolution (Search)
: Displays the recording
resolution in Placyback mode.
●
Codec (Search)
: Displays the codec information in
Placyback mode.
