Part 1 - Remote Setup
38
•
Motion Ignoring Interval
: With Motion Ignoring
Interval configured, no event log or notification is
generated for motions detected during a period of
time following a motion detection event.
•
Daytime
: Specify when daytime starts and ends. All
other times will be assumed as nighttime.
•
Event Action
: Select a motion detection event alert
action.
-
Alarm Out
: Select if you wish to generate an alarm
out.
-
Send Email
: Select if you wish to send an email.
Select the
Image Attachment
option to attach a
.jpg image of the event detected to the email.
-
Remote Callback
: Select this option to send a
message to a remote system and then select which
system to send the message to.
• Not supported from the IDIS Web program.
• The camera must be registered to the remote
system in order to use the
Remote Callback
feature.
-
Audio Alarm
: Select this option to generate an
audio alert and then choose an audio file (.wav).
-
FTP Upload
: Select this option if you wish to
upload images to the FTP server.
-
Record
: Select this option to record video.
-
Move PTZ to
: Select a preset position to move the
camera to that position. Preset positions can be set
from the Remote Setup (
Video>PTZ>Preset
).
Face Detection
Select
Face Detection
to configure face detection event
settings. With face detection event enabled, detections
of face with designated size will be assumed as events.
•
Max Detect Count
: Select the number of faces to
be detected. Only the designated number of faces is
detected when a face detection event occurs.
•
Sensitivity
: Select face detection sensitivity levels.
Higher values will result in more sensitive face
detection. If
Max. Detect Count
is set to
32
, faces are
detected in the sensitivity level of
5
.
•
Minimum Face Size
: Select the face size for event
detection. A face size must be bigger than the
designated size in order for it to be considered as a
face detection event.
