Part 1 - Remote Setup
34
Trip-Zone
Select
Trip-Zone
to configure trip zone event settings.
With trip zone event enabled, motion of the objects
detected inside/outside the selected area will be
assumed as an event.
DC-D3233FRX-N, DC-D3233FX-N
DC-D6233FRX, DC-D6233FX
•
Sensitivity
: Select daytime and nighttime motion
detection sensitivity levels. Higher values will result
in more sensitive motion detection.
DC-D3233FRX-N,
DC-D3233FX-N only
•
Trip-Zone
: Click
Setup
and define the trip zone using
blocks.
-
(Select)/ (Unselect)
: Enable/disable trip zone
blocks.
-
(Single Block)
: Select/unselect trip zone blocks
individually.
-
(Zone)
: Select/unselect multiple trip zone blocks.
-
(All)
: Select/unselect all trip zone blocks.
-
(Polygon)
: Select/unselect polygon trip zone
blocks by the number of points.
Some models only
Polygon is not supported in IE 10 or earlier.
-
Trip Direction
: Define in which direction the
motion has to occur in order for it to be considered
as an event. Select
In
for movement occurring from
outside the trip zone in and
Out
for movement
occurring from inside the trip zone out.
