Part 1 - Remote Setup
35
Tampering
Select
Tampering
to configure tampering detection
event settings. With tampering detection event enabled,
a sudden change in the video, such as due to movement
of the camera or covering up of the lens, will be
assumed as an event.
•
Sensitivity
: Define the tampering detection
sensitivity. Higher values will result in more sensitive
detection.
•
Activation time
: Specify how long tampering has
to be detected for it to be considered as an event.
Tampering detections that do not last for the
specified duration of time will not be considered as
events.
•
Use Ignoring Time
: Define the event ignoring time.
Tampering detections taking place during the defined
time range will not be assumed as events.
•
Event Action
: Select a tampering detection event
alert action.
-
Alarm Out
: Select if you wish to generate an alarm
out.
-
Send Email
: Select if you wish to send an email.
Select the
Image Attachment
option to attach a
.jpg image of the event detected to the email.
-
Remote Callback
: Select this option to send a
message to a remote system and then select which
system to send the message to.
•
Not supported from the IDIS Web program.
•
The camera must be registered to the remote
system in order to use the
Remote Callback
feature.
-
Audio Alarm
: Select this option to generate an
audio alert and then choose an audio file.
DC-
B4501X model only
-
FTP Upload
: Select this option if you wish to
upload images to the FTP server.
-
Record
: Select this option to record video.
-
Move PTZ to
: Select a preset position to move the
pan/tilt driver to that position. Preset positions can
be set from the remote program.
Event Action
settings must be configured correctly
in order to perform event actions.
