Table 2-7. X1 Outdoor Router RF Specifications
Category
Description
LNB Support
Fsym > 10 Msps DRO LNB
Fsym > 1 Msps +/-10 ppm PLL LNB
Fsym > 1 Msps +/-35 ppm Uni-Ku LNB
Internal reference LNBs only
Frequency Range
Transmit:
Receive:
950-1700 MHz, Composite Power 0 dBm/-30 dBm
950-2150 MHz, Composite Power -5 dBm/-65dBm
Frequency Tuning Step Size
Transmit:
Receive:
0.6 Hz
Sub-Hertz with Demodulator
RF Power Range
Transmit:
Receive:
-30 dBm to 0 dBm
Single Carrier Input Power:
Minimum: -130 +10Log(Symbol Rate) dBm to -5 dBm
Pmax=0dBm (MIN), 30 dB attenuation adjustable in 1 dB steps
Composite Wideband Input Power: -5 dBm (MAX)
RF Power Adjustability
Transmit:
Receive:
1.0 dB Nominal Step Size
Under AGC for all valid Rx input power range
Typical Transmit and Receive
Phase Noise (dBc/Hz) at:
Typical Phase Jitter at 14 kHz to
1 MHz:
Frequency
Phase Noise
1 kHz
-75
10 kHz
-85
100 kHz
-95
1 MHz
-105
1.8
rms
Transmit Carrier Suppression
≤
-40 dBc (MAX)
Discrete Spurs, harmonics and
non-harmonics
≥
50 dBc, with output
≥
-15 dBm, Inband 32 dBc
Modulator Spectral Shaping
DVB-S2 (ETSI EN302307)
Transmitter On/Off
≥
50 dBc, with output power
≥
-15 dBm
Installation, Support, and Maintenance Guide
9
X1 Series Satellite Router
X1 Outdoor Router Specifications
Summary of Contents for X1 Series
