iDirect Evolution X1, Installation, Support, And Maintenance Manual

Page: 29 / 90

Installation, Support, and Maintenance Guide 15
Evolution X1 Satellite Router
X1 Outdoor Router Specifications
3.2.3 RF Specifications
The X1 Outdoor Router RF specifications are defined in Table 3-3 .
Table 3-6. X1 Outdoor Router RF Specifications
Category Description
Frequency Range
Transmit
Receive
950-1700 MHz, Composite Power 0 dBm/-30 dBm
950-2150 MHz, Composite Power -5 dBm/-65dBm
Frequency Tuning Step Size
Transmit
Receive
0.6 Hz
Sub-Hertz with Demodulator
RF Power Range
Transmit
Receive
-30 dBm to 0 dBm
Single Carrier Input Power:
Minimum: -130 +10Log(Symbol Rate) dBm to - 5 dBm
Pmax = 0 dBm (MIN), 30 dB attenuation adjustable in 1 dB steps
Composite Wideband Input Power: -5 dBm (MAX)
RF Power Adjustability
Transmit
Receive
1.0 dB Nominal Step Size
Under AGC for all valid Rx input power range
Typical Transmit and Receive
Phase Noise (dBc/Hz) at
Typical Phase Jitter at
14 KHz to 1 MHz

1.8

rms
Transmit Carrier Suppression

40 dBc (MAX)
Discrete Spurs, harmonics and
non-harmonics

50 dBc, with output

-15 dBm Inband 32 dBc
Modulator Spectral Shaping DVB-S2 (ETSI EN302307)
Transmitter On/Off

50 dBc, with output power

-15 dBm
Frequency Phase Noise
1 KHz -75
10 KHz -85
100 KHz -95
1 MHz -105