“ON/OFF”
switch
WARNING!
Read operator manual prior to use
Power On Device
ilex unit is equipped with power cord. Plug power cord into hospital grade
outlet. Press Green “ON/OFF” switch on the left side of the top shelf.
Scan Here for
Operator Manual
Then Scroll to ilex
Select Layout or “PIP Mode”
To change layouts, press PIP button on remote. Each press of the PIP button will cycle to the next layout. As shown: Single, Picture-in-Picture (PIP), Picture-by-
Picture (PBP), Triple, and Quad.
DVI1/DP1
DVI3/DP2
DVI2
DVI4
DVI1/DP1
DVI3/DP2
DVI2
DVI1/DP1
DVI3/DP2
PBP
Triple
Quad
DVI1 or DVI 2 or
DVI3 or DVI 4 or
DP1 or DP2
Single
DVI1/DP1
DVI3/DP2
PIP
Ilex Q-Card
L280-1159 Rev A
L280-1254 Rev B
DVI 3
DVI 1
DVI 2
DVI 4
Plug in video sources to be connected to monitor
Each video channel has a designated DVI input on
the monitor. The device connected first in each
channel will show on the monitor. DVI 3 utilizes
the router switch. To switch between multiple
inputs, see back side of Q-card.
PIP Button
