SETUP
Moving table to desired location:
1) Make sure all casters are unlocked
2) Position table
AC Power:
1) Plug power cord into properly grounded outlet
2) Protect cord from damage by casters or other
equipment
Controls:
1) Connect hand control and foot control (if equipped)
2) Lock all casters
3) Operate controls to ascertain power is present and
table functions properly
AC FAILURE
Internal battery allows table to be returned to a
position to safely remove patient
CPR
Retract tabletop and lower table position to a
comfortable height to perform CPR
CLEANING AND STORAGE
1) Lock casters
2) Unplug power cord
3) Clean and disinfect table.
WARNING!
Read operator manual prior to use
Aspect 100-4 Q-CARD
www.imagediagnostics.com
