Idex Hale Sam, Operation Installation Maintenance Manual

Page: 75 / 141

59
after the reset, touch and drag the desired discharge (select from the 12 valves displayed at top
of page) to the desired Quickset position (HomeScreenQuickset1 thru 4 targets displayed at bot-
tom of page).
Perform the following to rearrange the order of the discharge valves displayed as Quickset or to
change which discharge valve displays as a Quickset on the Auto Mode Home screen.
A.
Touch and hold system options button until loading icon completes circle
(Figure 21, page 23) and Enter Password icon group appears.
B. Using password icon group, touch user/dealer password (see Table 6, page 51)
digits, then touch ENTER button, to enter Display Menu screen (Figure 24,
page 24).
C. Touch DISCHARGE QUICKSETS button to enter DISCHARGE SETTINGS screen
(see Figure 58).
NOTES
Record or note current Quickset assignments. (Most useful when only rearranging
Quickset position on Home screen.)
HomeScreenQuickset1 thru HomeScreenQuickset4 display on the home screen from
the left most position to the right most position.)
D. Touch RESET button (center of screen near bottom).
E. Touch and drag all desired discharge valves (select from the 12 listed at top of
screen) to desired Quickset position (listed at bottom of screen).
F. Touch Home button.
6.2.1.3 Change User/Dealer Password
PERFORMING THIS PROCEDURE CAUSES SAM TO EXIT AUTO MODE.
Perform the following to change/set the user/dealer password for the system.
A.
On SAM Control Center, touch and hold system options button until loading icon
completes circle (Figure 21, page 23) and Enter Password icon group appears.
B. Using password icon group, touch user/dealer password (see Table 6, page 51)
digits. (See Figure 22, page 24). Then touch ENTER button.
C. Touch ENTER button, to enter Change Password screen.
(See Figure 22, page 24).
NOTES
The new password must ONLY consist of five [5] numbers. (No letters or symbols.)
Record or note current password. (Most useful when system is reset to factory de-
faults.)
The Enter Old Password text box is the default focus for this screen, if focus has been
changed to anything else, touch the Enter Old Password text box (sets focus to the box)
so the current password can be entered.
D. Enter current password in Enter Old Password box.