Seat Shell
RED/WHT
G00074RED/G00074WHT
1
A
Frame
G00075
1
B
Bottom
G00077RED/G00077WHT
1
D
Washers
G00079
1
F
Hex Wrench
G00081
1
H
Chair Legs
RED/WHT/WOOD
G00076RED/G00076WHT/G00076WOOD 1
C
Nut Plate
G00080
1
G
Screws
G00078
1
E
Item Part Name Part #
Qty
Warning
1. Product is for single person use only.
2. Do not use this chair unless all bolts and knobs are securely tightened.
3. Check that all bolts and knobs are tightened every six months
or as needed.
4. Dispose of packing material properly. Do not use plastic cover as a head
covering. Suffocation may result.
5. Do not use this chair as a stepladder.
For assistance, call (888) 471-1616, or www.youtube.com/user/ideskInc1
A
B
C
Assembly Instructions
MUSE CHAIR
1
3
5
2
Turn seat shell upside down.
Push nut plates into slots on the
bottom of seat shell with a flat
screwdriver. All nut plates are
identical.
Install washers and screws through
frame and bottom as shown into nut
plates and tighten with hex wrench.
Place frame above bottom.
Make sure the holes in frame
and bottom are aligned with
the threaded holes in the nut
plates.
Turn the chair to normal use
position and make sure all 4 legs
touch the ground. In case of
uneven floor, rotate the chair legs
to level the chair.
4
Fasten chair legs onto frame as
shown.
With the arrows on bottom facing the
front of the chair, place bottom on seat
shell. Make sure the holes in the bottom
are aligned with threaded holes in the
nut plates.
6
5mm
slot
G
G
D
A
B
D
A
C
B
C
B
D
F
E