4
© Ideon Audio, 2023 – eos time v.1
Due to continuous research, Ideon Audio reserves the right to change specifications without notice.
Highest precision USB re-clocking platform
eos time
Ideon Audio’s eos time connects
between the digital output like a
computer or a music server, and the
DAC. It achieves amazing sound
performance by uncovering lost detail,
enhancing dynamics, re-clocking the
signal using ultra-low jitter oscillators,
and minimizing transmission losses.
The performance enhancements are
immediately evident and phenomenal.
Cutting edge technology:
based on
Ideon Audio’s proprietary design, the eos
time, deploys
• Triple ultra-low noise linear power
supply
• Femto, ultra-low noise phase clock
• Dual re-drive signal conditioning chip
•
Modular digital core for future
updates
The eos time’s secondary but very
important function is that it disconnects
the computer’s noisy 5v bus power
coming down the USB cable, providing
clean 5v BUS to its output - for DACs that
need it and can benefit from this feature!
- via a second ultra-low-noise regulator.
In the rear panel of the device there is a 5v on switch – as seen in illustration below.
With this switch set to the on position, the 5v power rail is on – to the USB cable
(power goes through the USB cable).
When not set to the on position, the 5v power rail is cut off off from the USB cable
resulting in better, cleaner data transmission. This switch is included as some DACs do
not provide power to the USB
cable; it can also help you to experiment with different USB cables. Unless necessary,
however, we recommend you leave this power rail off.
In the rear panel as shown in the illustration below, you will also find the USB In and
Out sockets (to connect the host and the DAC with the corresponding USB cables)
and the On/Off switch of the device.
eos time
eos time USB reclocker
5V on
in
out
USB
Caution
RISK OF ELECTRIC SHOCK
DO NOT OPEN
Made in
Athens, Greece
230v
1 1 5 v
