48
incoming call on the fifth ring if you have no previous new messages and
on the third ring if you do.
When you call your answering machine to check messages, if it does not
answer on the third ring, then you can hang up immediately, knowing
that you have no new messages. This feature can save you the cost of a
long-distance call when you check your messages remotely.
11.3.2
Activate/Deactivate Remote Access
1.
From the home screen, press
M
.
2.
Press
+
/
-
to ANSW MACHINE and then press
M
to select.
3.
Press
+
/
-
to SETTINGS and then press
M
to select.
4.
Press
+
/
-
to REMOTE ACC. and then press
M
to select.
5.
Press
+
/
-
to select ACTIVATE or DEACTIVATE and then
press
M
to confirm.
•
A confirmation tone is played.
6.
Press
O
to return to standby mode.
Note: Once the remote control access is activated, you can check the
messages on your answering machine when you are away from home, by
calling from another phone.
The Master PIN is used for accessing the answering machine remotely. If
your answering machine is off, you must change your Master PIN from its
default 0000 before you can use the remote access feature to turn on
your answering machine.
11.3.3
Change the Voice Language
You can select a different language for the answering machine’s pre-
recorded outgoing message. The default setting is ENGLISH.
1.
From the home screen, press
M
.
2.
Press
+
/
-
to ANSW MACHINE and then press
M
to select.
3.
Press
+
/
-
to SETTINGS and then press
M
to select.
4.
Press
+
/
-
to LANGUAGE and then press
M
to select.
5.
Press
+
/
-
to select your preferred language and then
press
M
to confirm.
•
A confirmation tone is played.
6.
Press
O
to return to standby mode.
