IDEC WindO/I-NV4, User Manual

Page: 391 / 1738

WindO/I-NV4 User’s Manual
7-1
7
Dra
w
in
gs
This chapter describes the procedures for drawing with shapes and the procedures for configuring pictures and text.
1.1 Line
●
Line Drawing Procedure
This section describes the procedure for drawing lines.
1
On the Home tab, in the Drawings group, click Shapes , and then click (Line) under Basic Shapes .
The mouse cursor changes to (pencil).
2 Click and hold the mouse button at the location (start point) to start drawing the line on the edit screen.
3 Drag the mouse to the stop point location.
A line is drawn that connects the start point and stop point.
Chapter 7
Drawings
1 Shapes
HG3G HG2G-5F HG5G-V HG4G-V HG3G-V HG2G-V HG2G-5T HG4G HG1G HG1P HG2J-7U
Start
point
Stop
point
Drag
To change the style of the drawn line, perform one of the following operations.
• Double click the line to open the Properties dialog box
• Select the line and select the style with
Shape Style on the Format tab
• Select the line and open the right click menu