IDEC WB1F Series, User Manual

Page: 94 / 116

2. Installation & wiring 3. Functions 4. Support tool Appendix 1. Overview
5-9
Control commands list
Detailed response examples
z
No. 36 Get selection number (current value)
Prefix
Selection num-
ber
(Current value)
Suffix
^ 0 CR LF
Selection number is a numeric value from "0" to "7".
z
No. 37 Get selection number (memory value)
Prefix
Selection num-
ber
(Memory value)
Suffix
^ 0 CR LF
Selection number is a numeric value from "0" to "7".
z
No. 39 Get version
Prefix Model number Separator
Main application
version
Separator
Bootloader ver-
sion
Suffix
^ WB1F-100S1S / A-001.000.00 / B-001.000.00 CR LF
The model number is "WB1F-100B1S" for the RS-232 type and "WB1F-100S1S" for the USB type.
The main application version is the numeric values in the format 3-digit.3-digit.2-digit that follow A- which indicates the
main application.
The bootloader version is the numeric values in the format 3-digit.3-digit.2-digit that follow B- which indicates the boot-
loader.
z
No.40 Get communication settings (current values), No. 41 Get communication settings (memory values)
Prefix
RS-232 settings
Separator
Communication
speed
Data length Parity Stop bits Flow control
^ 03, 01, 01, 00, 00 /
Communication command
Separator
Reserved
Check digit addi-
tion
Uppercase
response
Reserved
00, 00, 00, 00 /
Communication command
Separator
Prefix Prefix Prefix Prefix
5e, 00, 00, 00 /
Communication command
Suffix
Suffix Suffix Suffix Suffix
0d, 0a, 00, 00 CR LF
The RS-232 settings are the setting values in "3. 5 Configuration item table" -
F
P. 3-36 "RS-232 settings" .
The communication command is the setting values in "3. 5 Configuration item table" -
F
P. 3-48 "Communication
command Function" .