Programming IDEC SmartRelay
74
IDEC SmartRelay Manual
Setting the time
Set the time T = 12:00 minutes:
1. Move the cursor to the first digit:
Press or
2. Select the digit '1':
Press
▲
or
▼
3. Shift the cursor to the second digit:
Press or
4. Select digit '2':
Press
▲
or
▼
5. Move the cursor to the unit:
Press or
6. Select the timebase 'm' (for minutes):
Press
▲
or
▼
Showing/hiding parameters - the parameter protection mode
If you want to show/hide the parameter and allow/prevent its
modification in parameter assignment mode:
1. Move the cursor to the protection mode: Press or
2. Select the protection mode:
Press
▲
or
▼
The display should now show:
3. Confirm your entries with:
OK
Enabling/disabling retentivity
To decide whether you want to retain your current data after
a power failure or not:
1. Move the cursor to the retentivity setting:Press or
2. Select the retentivity setting:
Press
▲
or
▼
▲
▲
▲
▲
▲
▲
▲
▲
T=12:00m
B2 +R
T=12:00m
B2
R
or
Protection mode +:
The value of the time T can be
modified in parameter assign-
ment mode.
Protection mode --:
The value of the time T is hid-
den in parameter assignment
mode
▲
▲
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
