IDEC SmartAXIS Touch FT1A Series, User Manual

Page: 864 / 1232

2 Text Groups and Text Configuration Procedure
19-10
SmartAXIS Touch User’s Manual
2.3 Switching the Displayed Language by Value of Device
When multiple text groups have been created, the text group can be switched with a value of device to display a
different language.
This section describes an example when the registration text for a button changes between English, Chinese, and
Japanese.
1
Following the steps in “Creating Text Groups” on page 19-3, specify Number of Text Groups as 3, and under Text
Group Name , enter “English” for Group 1 , “Chinese” for Group 2 , and “Japanese” for Group 3 . Select the Use
Dynamic Text check box and set Trigger Device to D100.
2
Following the steps in “Registering Text” on page 19-5, register the text.
3
Create a Bit Button.
On the
Home tab, in the Parts group, click Buttons , and then click Bit Button .
4
Click a point on the edit screen where you want to place the Bit Button.
External device
Touch
RUN STOP
Bit Button 2 (Text ID: 2)
Bit Button 1 (Text ID: 1)
䘆㺂 ڒ↘
D100 :
D100 :
D100 :
1
2
3
Text ID: 1
Group 1: English Group 2: Chinese
Text ID: 2
Group 3: Japanese
ڒ↘
RUN
STOP
䘆㺂 運転
停止
運転 停止
Text ID: 1
運転
Group 1: English Group 2: Chinese
䘆㺂
Text ID: 2
停止 ڒ↘
Group 3: Japanese
RUN
STOP