IDEC SmartAXIS Touch FT1A Series, User Manual

Page: 255 / 1232

SmartAXIS Touch User’s Manual
6-11
1 Shapes
6
Drawings
●
Properties of Circle/Ellipse Dialog Box
This section describes items and buttons in the Properties dialog box.
■
Line Width
Selects the line width for the circle or ellipse from the following.
1 dot , 3 dots , 5 dots
3 dots and 5 dots can only be configured when Solid is selected for Line Type .
■
Line Type
Selects the line type for the circle or ellipse from the following.
Solid , Dot , Dash , Long Dash , Long Dash Dot , Long Dash Dot Dot
Dot , Dash , Long Dash , Long Dash Dot , and Long Dash Dot Dot can only be configured when 1 dot is selected
for Line Width .
■
Foreground Color, Background Color
Selects the foreground color and the background color to use for the circle or ellipse (color: 256 colors, monochrome:
8 shades).
Click either button to display the Color Palette. Select a color from the Color Palette.
■
Pattern
Selects the pattern for the circle or ellipse.
Click this button to display the Pattern Palette. Select a pattern from the Pattern Palette.
■
Blink
Select this check box to make the circle or ellipse blink.
The blink interval is specified with
Blinking Cycle on the System tab in the Project Settings dialog box.
■
Shadow
Selects the style of shadow attached to the circle or ellipse from the following. This option draws the circle or ellipse
in a three-dimensional manner.
None , Convex , Concave
This option can only be configured when 1 dot is selected for Line Width and Solid is selected for Line Type .
Convex Concave Convex