manualshive.com logo in svg

IDEC SmartAXIS Touch FT1A Series, User Manual

Share
Download
IDEC SmartAXIS Touch FT1A Series User Manual Download Page 1040

1 Communicating with the Touch

23-4

SmartAXIS Touch User's Manual

1.2 Connect Touch to a Computer

Connection type varies according to the interface between the Touch and computer.

●

USB cable connection

The computer must be running Windows XP/Vista (32-bit version only), or Windows 7 (64-bit and 32-bit versions), 
and must have a USB 1.1/2.0 port.

●

Ethernet cable connection

The computer must be equipped with an Ethernet port.

Computer

USB cable

A plug

Mini-B plug

To USB port

To USB interface

Touch

• A USB driver must be installed when connecting the Touch to a computer with a USB cable. Install the 

USB driver when making the connection for the first time.
For details, refer to Appendix “8.1 Installing the USB Driver” on page A-18.

• The USB driver does not have to be installed for subsequent connections.

Note, the connection must use the same USB port that was connected to when installing the USB driver. 
The computer will not recognize the Touch immediately if the USB cable is connected to a different USB 
port.

• Multiple Touch connections using different USB ports on the same computer are not supported.
• The computer cannot be connected to the Touch via a USB hub.

Computer

Ethernet cable

To Ethernet port

To Ethernet interface

Touch

It is necessary to configure the Touch according to the local network that is used.
On the 

Communication Interface

 tab in the Project Settings dialog box, specify the IP address, subnet 

mask, and default gateway, and clear the 

Forbid Maintenance Communication

 check box. For details, 

refer to Chapter 3 “3.2 Communication Interface Tab” on page 3-27.

Summary of Contents for SmartAXIS Touch FT1A Series

















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands