IDEC SmartAXIS FT9Z-1A01, User Manual

Page: 188 / 393

6: HMI F
UNCTION
6-20 S
MART
AXIS P
RO
/ L
ITE
U
SER
'
S
M
ANUAL
FT9Y-B1378
Checking/Clearing Error Information
When an error occurs while the SmartAXIS is running, an error message is displayed on the LCD. This section describes the steps
for checking the details and clearing the error.
1.
When an error occurs, the following message is displayed.
2.
Press and hold the (OK) button. The error code is displayed.
Error details can also be checked from Error Status on the system menu.
3.
Select the error type with the (up) and (down) buttons and press the (OK) button.
Only errors that have occurred are displayed.
4. Press the (ESC) button.
5. Select
Clear Error
with the (down) button and press the (OK) button.
6. Select
Yes
with the (down) button and press the (OK) button.
General errors and user program execution error are cleared.
Note: For details on error information, see "Troubleshooting" on page 14-1.
When an error occurs while SmartAXIS is
running and the SmartAXIS continues running
When an error occurs while SmartAXIS
is running and the SmartAXIS stops
Error!
PLC is stopped.
Press OK button for
more details.
Error!
PLC is running.
Press OK button for
more details.
General Error 㸸 3
Execution Error 㸸 0
Clear Error
General Error 㸸 3
Power failure
Watchdog Timer
General Error
㸸
3
Execution Error
㸸
0
Clear Error
Do you want to
clear error code?
No
Yes