IDEC MICROSmart FC6A Series, User Manual, Page: 385 / 578

FC6A S
ERIES
MICROS
MART
U
SER
’
S
M
ANUAL
FC9Y-B1722 7-17
7: HMI F
UNCTION
■
Changing the IP address
1. Display the CPU Network Settings screen with the same procedure as steps 1 through 5 in "Changing the setting" on page 7-15.
2. Select IP Address with the (up) and (down) buttons and press the (OK) button.
The range is 000.000.000.000 to 255.255.255.255.
For example, change the IP address to 192.168.1.6.
3. Move the cursor with the (left) and (right) buttons and modify the value with the (up) and (down) buttons.
4.
Press the (OK) button to change the CPU module's IP address to 192.168.1.6 and to display the CPU Network Settings
screen.
Next, to change the setting, subnet mask, gateway, preferred DNS server, and alternate DNS server, see the following pages.

"Changing the setting" on page 7-15, from step
6

"Changing the subnet mask" on page 7-18, from step 2

"Changing the gateway" on page 7-19, from step
2

"Changing the preferred DNS server" on page 7-20, from step 2

"Changing the alternate DNS server" on page 7-21, from step
2
5.
Press the (ESC) button to display the screen in the following diagram.
Select Yes with the (down) button and press the (OK) button.
Setting: Fixed
IP Address
192.168. 1. 5
CPU Network Settings
IP Address:
192.168. 1.
6
Setting: Fixed
IP Address
192.168. 1. 6
CPU Network Settings
Do you want to
configure network?
No
Yes