IDEC MICROSmart FC6A Series, User Manual

Page: 38 / 578

2: P
RODUCT
S
PECIFICATIONS
2-8 FC6A S
ERIES
MICROS
MART
U
SER
’
S
M
ANUAL
FC9Y-B1722
(28) Ethernet Port 1 Cover
A removable cover that protects Ethernet Port 1. When using the Ethernet port, remove the Ethernet Port 1 cover.
(29) Power Supply Terminals Cover
An openable cover that protects the power supply terminals. Remove the dummy cartridge when connecting a digital I/O
cartridge, analog I/O cartridge, or communication cartridge.
(30) USB Port Cover
An openable cover that protects the USB port. When using the USB port, open the USB port cover.
(31) Communication Connector Protection Sticker
This sticker protects the communication connector. Remove the communication connector protection sticker when
connecting the HMI module.
Power Supply Specifications
■
AC Power Type
Type No. FC6A-C16R1AE, FC6A-C24R1AE, FC6A-C40R1AE, FC6A-C40R1AEJ
Rated Operating Voltage 100 to 240V AC
Voltage Fluctuation Range 85 to 264V AC
Rated Power Frequency 50/60 Hz (47 to 63 Hz)
Maximum Power Consumption Standalone When Maximum Load is Connected
FC6A-C16R1AE 33 VA 54 VA
FC6A-C24R1AE 35 VA 61 VA
FC6A-C40R1AE 41 VA 74 VA
FC6A-C40R1AEJ 37 VA 74 VA
Allowable Momentary Power
Interruption
10 ms or longer (when rated power supply voltage)
Withstand Voltage
Between power and PE terminals: 1,500V AC, 1 minute
Between input and PE terminals: 1,500V AC, 1 minute
Between relay output and PE terminals: 2,300V AC, 1 minute
Between power and input terminals: 1,500V AC, 1 minute
Between power and relay output terminals: 2,300V AC, 1 minute
Between input and relay output terminals: 2,300V AC, 1 minute
Insulation Resistance
Between power and PE terminals: 100 M Ω or higher (500V DC insulation resistance tester)
Between input and PE terminals: 100 M Ω or higher (500V DC insulation resistance tester)
Between relay output and PE terminals: 100 M Ω or higher (500V DC insulation resistance tester)
Between power and input terminals: 100 M Ω or higher (500V DC insulation resistance tester)
Between power and relay output terminals: 100 M Ω or higher (500V DC insulation resistance tester)
Between input and relay output terminals: 100 M Ω or higher (500V DC insulation resistance tester)
Inrush Current 40 A maximum
Isolation Between power terminal and internal circuit: Transformer isolated
Ground D-type ground (Class 3 ground)
Grounding Wire See "Recommended Ferrule List" on page 3-43
Power Supply Wire See "Recommended Ferrule List" on page 3-43
Effect of Improper Power Supply
Connection
Reverse polarity: Normal operation
Improper voltage or frequency: Permanent damage may be caused
Improper lead connection: Permanent damage may be caused
Weight
FC6A-C16R1AE 370 g
FC6A-C24R1AE 420 g
FC6A-C40R1AE 560 g
FC6A-C40R1AEJ 560 g