FC6A S
ERIES
M
ICRO
S
MART
A
LL
-
IN
-O
NE
T
YPE
C
OMMUNICATION
M
ANUAL
FC9Y-B1730
4-5
4: M
AINTENANCE
C
OMMUNICATION
2.
Click
Communication Mode
for port 1 and select
Maintenance Protocol
.
The
Maintenance Protocol (Port1)
dialog box appears.
3.
Configure the parameters to match the communication settings of the computer or operator interface.
4.
Click
OK
.
Configuring the maintenance communication for the expansion communication port is now complete.
Baud Rate (bps):
115200 bps (1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200)
Data Bits:
7 (7 or 8)
Parity:
Even (None, Even, Odd)
Stop Bits:
1 (1 or 2)
Receive Timeout (ms):
500 (10 to 2550)
Slave Number:
0 (0 to 31)
Slave number can be specified by either a constant or a data register.
Type
Details
Constant
Set within the range of 0 to 31
Data register
Store the slave numbers 0 to 31 in the following special data registers
Port 1: D8100
Port 2: D8102
Port 3: D8103