IDEC MICRO/I HG4G-CJT22 F-B Series, User Manual, Page: 95 / 1665

WindO/I-NV4 User’s Manual
2-63
4 Customizing WindO/I-NV4
2
WindO/
I-NV4 F
eatur
es & B
asic Oper
ations
■
AutoSave
Save the following information every: Specify the interval (5 to 60 minutes) for creating an AutoRecover file or Backup
from a project being edited.
This option can only be set when
AutoRecover file or Backup is selected.
AutoRecover file: A project being edited is automatically saved as often as you
want. The saved AutoRecover file is used to recover the project
if a power failure or otherwise occurs that forces WindO/I-NV4
to quit. The AutoRecover file is automatically deleted when the
project is manually saved or WindO/I-NV4 exits. When the
AutoRecover file exists, the
Project Recovery dialog box is
displayed when WindO/I-NV4 starts. For details, refer to
“Project Recovery Dialog Box” on page 2-40.
Backup: A backup copy of a project being edited is created as often as
you want. The file name of the backup is as follows:
Project Name _ Backup Date .pn4
Backup date format: YYYYMMDDhhmmss
(YYYY: year, MM: month, DD: day, hh: hour, mm: minute, ss:
second)
Example: Project Name is "TEST01" at 4:56:07 on January
23, 2016
TEST01_20160123045607.pn4
If the project file has not been changed, a backup will not be
created when the interval specified in
Backup elapses.
Backup file location:
Specify the save location of the backup file.
Click
Browse to display the Browse For Folder dialog
box.
This option can only be set when
Backup is selected.
Display Warning Message when the number of files exceeds:
Select the maximum number of backup files from the
following.
100 , 500 , 1000
When the specified number of files has been exceeded, a
warning message is displayed when WindO/I-NV4 starts.
This option can only be set when
Backup is selected.