manualshive.com logo in svg

IDEC MICRO/I HG4G-CJT22 F-B Series, User Manual, Page: 71 / 1665

Share
Download
IDEC MICRO/I HG4G-CJT22 F-B Series User Manual Download Page 71

WindO/I-NV4 User’s Manual

2-39

2 Starting and Exiting WindO/I-NV4

2

WindO/

I-NV4 F

eatur

es & B

asic Oper

ations

●

Automation Organizer Updater Dialog Box

Automation Organizer Updater dialog box is a feature that keeps WindO/I-NV4 up to date.
If a new version of Automation Organizer is released, the Automation Organizer Updater dialog box is displayed when 
WindO/I-NV4 starts.

■

Available Updates

■

Description

This area shows the details of the latest changes in the software.

■

Preference

The Update Preference dialog box is displayed when this button is clicked.
To update information when WindO/I-NV4 starts, check this check box.
The Automation Organizer Updater dialog box will be displayed when there is an update.

■

Close

Closes the Automation Organizer Updater dialog box and start WindO/I-NV4.

In order to display the Automation Organizer Updater, your computer must be connected to the Internet.

Date

Shows the date the software was released.

Information

Shows the software's title and version.
Click on this link to connect to IDEC's download site.
The software can be updated by downloading and running the latest version.

Summary of Contents for MICRO/I HG4G-CJT22 F-B Series


































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments