IDEC MICRO/I HG4G-CJT22 F-B Series User Manual Download Page 394

Page: 394 / 1665

1 Shapes

7-22

WindO/I-NV4 User’s Manual

1.9 Fill

●

Fill Configuration Procedure

This section describes the fill configuration procedure.

On the

Home

tab, in the

Drawings

group, click

Shapes

, and then click

(Fill) under

Fill

The mouse cursor changes to (pencil).

Click on a section where multiple shapes overlap on the edit screen.
The section where multiple shapes overlap is filled with the

Foreground Color

Background Color

, and

Pattern

the shape last drawn or the shape that last had its style changed. The clicked location is the fill start point.

Fill start point

• To change the fill style, perform one of the following operations.

- Double click the fill start point to open the Properties dialog box
- Select the fill start point and select the style with

Shape Style

on the

Format

tab

- Select the fill start point and open the right click menu

• If you move the fill start point, the closed region where it was moved to is filled.

• To select the fill start point, click on the edit screen or select Fill on the

Object List

window.

Fill start point

Summary of Contents for MICRO/I HG4G-CJT22 F-B Series


































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for MICRO/I HG4G-CJT22 F-B Series

Reviews:

IDEC MICRO/I HG4G-CJT22 F-B Series, User Manual, Page: 394 / 1665

Search results

Summary of Contents for MICRO/I HG4G-CJT22 F-B Series

Reviews: