IDEC MICRO/I HG4G-CJT22 F-B Series, User Manual, Page: 350 / 1665

3 Base Screen
5-16
WindO/I-NV4 User’s Manual
■
Display the Order of Overlapping Screens
You can select the display order of the Base Screen and the overlay screens.
Example: To display the Base Screen being edited as the background
Example: To display the Base Screen being edited above overlay screen: 3
■
Flash
Select one of the following items as the setting when the screen is flashing.
■
Focus Order
Sets the focus order for Numerical Input and Character Input. The focus order is the order the focus moves between
Numerical Input or Character Input when the user presses the
ENT key. Text can be input in Numerical Input or
Character Input that has focus. The focus order number starts from 0.
Base screen being edited
Overlay screen
(5 screens max)
Base screen being edited
Overlay screen: 3
None: Displays the screen.
Flash (1 sec cycle): The screen display is flashed in one second intervals.
Flash (0.5 sec cycle): The screen display is flashed in half second intervals.
Backlight OFF: Turns off the backlight until the screen is touched or until bit 0 or bit 7 is set to 1 in the
system area 1’s address 1.
Vertical: The focus moves vertically from top to bottom.
Horizontal: The focus moves horizontally from left to right.
Custom: Sets the desired order for moving the focus.
On the
View tab, in the Screens group, click Focus Order , and then click the parts in the
order to move the focus.
The focus moves in the following order when Numerical Input and Character Input on the screen is not
aligned to the left or top.
1
4
3
2
1
4
3
2
1234
5
890
67
1234
5
890
67
Vertical
X-axis left to right
Y-axis up to down
Horizontal