IDEC MICRO/I HG4G-CJT22 F-B Series, User Manual, Page: 330 / 1665

3 Project Settings Dialog Box
4-76
WindO/I-NV4 User’s Manual
3.17 Compatible Tab
The Compatible tab is used to enable the functions in previous versions of WindO/I-NV4 and older MICRO/I series
(HG1B).
This tab is only displayed when the
Use Compatible functions for previous version check box or the Use HG1B
Compatible functions check box is selected in the WindO/I-NV4 Options dialog box, on the General tab, under
Compatibility .
■
Compatible with previous version
This option is only displayed when the Use Compatible functions for previous version check box is selected in
the WindO/I-NV4 Options dialog box, on the General tab, under Compatibility .
HG3G HG2G-5F HG5G-V HG4G-V HG3G-V HG2G-V HG2G-5T HG4G HG1G HG1P
Script/Trigger Condition:
Calculate 16-bit data with 16-bit:
Select this check box to calculate arithmetic operations (+, -, *, /, modulo) as 16-bit data when
UBIN16(W) , BIN16(I) , or BCD4(B) is selected for Data Type . Data that exceeds 16 bits is
lost.
Clear this check box to calculate as 32 bits. No data will be lost.
Handle Logical operations as Bit operations:
Select this check box to process logical operations (||, &&) by replacing them with bit operations
(|, &). The priority of the replaced bit operators is the same as the corresponding logical
operators.
Communication:
Use the same O/I Link Communication as the HG4F/3F/2F/2S/1F:
Select this check box if you will connect the HG5G/4G/3G/2G-V, HG4G/3G or HG2G-5F/-5T,
HG1G/1P to the O/I Link Communication of the HG4F/3F/2F/2S/1F.